This GL87SR26D from ARROW LOCKS is a cylindrical lever locks from GL Series Lever lockset in SIERRA designs with a Satin Chrome finish and a 2-3/4" Backset. This particular design functions as a CLASSROOM Lever locks, is a Grade 1 level with heavy duty levers that offers an economically pleasing solutions for ADA compliance and is providing fewer subcomponents to allow for easy installations besides being your number one choice when economy is your first priority.
All Arrow GL Series locks are U.L. and c.U.L. listed for use on a 3 hour fire rating,A label or lesser doors and are certified to conform to the requirements of ANSI/BHMA A156.2, Series 4000, Grade 1.Federal Specification FF-H-106C. ANSI A117.1 Accessibility Code
California State Reference Code for levers returning to within 1/2 (12.7mm) of door surface.
Over Drive(Over Drive optional)-Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 70 degree s.
Housing-Interlocking lever tubes are made from dichromate plated steel. The tubes are attached to the rose insert. This offers fantastic support for a ridged feel without excess movement. Standard bearing sleeves used on most other Arrow lever series are not used on the GL.
Requires standard 2-1/8 (53.97mm) bore through door.
Thru-Bolts-Removable thru-bolts standard on GL Series.
Backset-2-3/4 (69.85mm) standard.
Latch-Stainless Steel with 1/2 (12.7mm) throw standard. Latch housing is steel, zinc dichromate finish for corrosion resistance.
1 (25.4mm) bore in edge of door is required.
Latch Front-Stainless steel. 2-1/4 (57.15mm) x 1-1/8 (28.57mm), 1/8 (3.175mm) in 2 (50.8mm).
Exposed Trim-Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks.
Rose Inserts-Contain coil spring which is a permanent assembly within rose insert. Inside and outside rose scalps are retained by
dimples that create an interference fit with the rose inserts. There are no special retention features added to the rose insert that align the scalp.
Strikes-Stainless steel. ANSI A115.2, 4-7/8 (123.82mm) x 1-1/4 (31.75mm) curved lip strike standard.
Door Thickness-1-3/8 (34.92mm) to 2 (50.8mm).
Handing-Non-handed. Levers operate bi-directionally.
Packaging-1 per box, 10 per case.
Warranty-Limited five year warranty.
ADA/AMERICANS WITH DISABILITIES ACT:
Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and
does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and "U" shaped handles are acceptable designs.
Note: Images shown may be for representation use only. Actual product may differ in finish and/or specifications. Please verify part number before ordering. If you need help with your order please email us or give us a call so we can assist you in choosing the right part number. Lockbargains.com will not be responsible for return shipping charges unless the part number and/or description was the error.
You may also be interested in the following product(s)